Author: GPS World Staff

  • International Navigation Conference seeks papers for 2 tracks

    The Royal Institute of Navigation is seeking papers for International Navigation Conference 2016 (INC 16), which will be held Nov. 8-10 in Glasgow, Scotland.

    INC 16 will address cutting-edge issues in positioning, navigation and timing. Of global importance, INC 16 will feature the latest developments in topics such as GNSS, indoor positioning, autonomous transport, security against cyber attack, resilience and quantum technology. Booking for the conference is now open.

    The conference will include both peer-reviewed and non peer-reviewed tracks, and will cater to academic, industrial and end-user interests. The conference proceedings will be made available online in a digital repository in the weeks following the conference.

    The abstract submission process varies depending on whether the paper is for the peer-reviewed or non peer-reviewed track:

    • Those wishing to submit a non-peer-reviewed paper for the conference should submit an abstract through the “Submit abstract” option on the conference home page, and can submit a paper for publication in the proceedings of any length. Non peer-reviewed submissions are due March 14.
    • Those wishing to submit a peer-reviewed paper should submit by March 14 a four-page short paper first, using the “submit short paper option” on the website’s home page. Following a selection process by the conference committee, successful authors will be invited to submit a longer paper (up to 10 pages) by June 15 for further peer review.

    Themes at the conference are:

    • Emerging Science
    • Modern Markets
    • Modern Threats
    • Multisensor PNT
    • Navigation Now
  • ESNC winner Sensolus keeps Antarctic scientists safe

    Scientists will now wear safety trackers from a Belgium start-up company while working in Antarctica.

    Antarctica is the coldest, windiest and harshest location on Earth. Temperatures can reach –90°C during winter and go down to –20ºC during summer. Winds can reach 250 km/h and visibility can sink to almost zero during whiteouts. With the potential for rapid changes in weather, all outdoor activities must always be done with the greatest care.

    Carrying a SticknTrack location tracker in the pocket from Sensolus, a start-up company from ESA’s Business Incubation Centre in Flanders, will help to keep the researchers safe. The same sensors will also be used to track skidoos, sledges and other equipment used.

    StickNTrack’s developers took third place in the 2014 European Satellite Navigation Competition (ESNC), after taking first in the Flanders regional competition. It also won the European Space Agency’s Innovation Award. The product debuted in August 2015.

    The Belgian Polar Secretariat, Sigfox and Sensolus announced an agreement in January to connect the 2016 Belgian Antarctic Research Expedition to the global Sigfox Internet of Things network.

    “This partnership will allow us to test technology that could be useful for the safety of our operations in Antarctica,” said Rachid Touzani, director of the Belgian Polar Secretariat.

    The expedition includes specialists in glaciology, climatology and geomorphology in charge of various Belgian and international scientific projects. They are hosted at Belgium’s Princess Elisabeth Research Station, 200 kilometers inland in the 2.7 million square kilometers region of Antarctica known as Queen Maud Land.

    The station — designed, built and operated by the International Polar Foundation — is the first polar base that combines eco-friendly construction materials, clean and efficient energy use, optimization of the station’s energy consumption and clever waste management. It can support up to 40 people during the brief Antarctic summer of November to February.

    The team members will work within 40 kilometers of the base and, for the first, 45 GPS-based Sensolus trackers connected to the Sigfox network will allow realtime tracking of their movements, in the often-extreme weather conditions.

    Sigfox ultra-narrow-band communications will secure the link to two antennas at the base station. The information will also be sent to Belgium.

    “Having our extremely battery-efficient StickNTrack GPS trackers at the Princess Elisabeth station is very exciting,” said Sensolus CEO Kristoff van Rattinghe. “We strongly believe that sustaining missions like this is the kind of real innovation we can achieve with the Internet of Things. And this is only possible through strong collaborations like the one set up for this mission.”

    The first results on the contribution of the Sensolus and Sigfox technology to the expedition will be released in March.

  • Retrofitted Predator succeeds in long-winged flight

    General Atomics Aeronautical Systems Inc. (GA-ASI) has successfully flown the Predator B/MQ-9 Reaper Extended Range (ER) Long Wing craft.

    The long-wing Predator is retrofitted with improved long-endurance wings, greater internal fuel capacity and additional hard points for carrying external stores. The flight took place Feb. 18 at GA-ASI’s Gray Butte Flight Test Facility in Palmdale, Calif., on a test aircraft.

    GA-ASI is a a manufacturer of remotely piloted aircraft (RPA) systems, radars, and electro-optic and related mission systems solutions.

    “Predator B ER’s new 79-foot wing span not only boosts the RPA’s endurance and range, but also serves as proof-of-concept for the next-generation Predator B aircraft that will be designed for Type-Certification and airspace integration,” said Linden Blue, CEO. “The wing was designed to conform to STANAG 4671 [NATO Airworthiness Standard for RPA systems], and includes lightning and bird strike protection, non-destructive testing and advanced composite and adhesive materials for extreme environments.”

    During the flight, Predator B ER Long Wing demonstrated its ability to launch, climb to 7,500 feet (initial flight test altitude), complete basic airworthiness maneuvers, and land without incident. A subsequent test program will be conducted to verify full operational capability.

    Developed on Internal Research and Development (IRAD) funds, the new wing span is 13 feet longer, increasing the aircraft’s endurance from 27 hours to more than 40 hours.

    Additional improvements include short-field takeoff and landing performance and spoilers on the wings that enable precision automatic landings. The wings also have provisions for leading-edge de-ice and integrated low- and high-band RF antennas.

    An earlier version of Predator B ER featuring two wing-mounted fuel tanks is currently operational with the U.S. Air Force as MQ-9 Reaper ER.

    The long wings are the first components to be produced as part of GA-ASI’s Certifiable Predator B (CPB) development project, which will lead to a certifiable production aircraft in early 2018.

    Further hardware and software upgrades planned for CPB will include improved structural fatigue and damage tolerance, more robust flight control software and enhancements allowing operations in adverse weather.

  • Microsemi broadens grand master timing options for network edge deployments

    Microsemi Corporation, a provider of semiconductor solutions differentiated by power, security, reliability and performance, has added two products to its IGM (Integrated Grand Master) product portfolio, the IGM-1100o (outdoor version) and the IGM-1100x (support external antennas), as well as capacity enhancements to its IGM-1100i (indoor version).

    The offerings broaden outdoor and indoor deployment options for mobile network operators when a cost-effective, precise timing master is needed, including small cells and backhaul to eNodeBs for wireless service delivery at the LTE network edge.

    “Last year, our innovative IGM-1100i solved the problem of providing precise time indoors where GPS signals usually cannot be received,” said Sri Purisai, vice president and business unit manager at Microsemi. “Today, backhaul to macro eNodeBs is one of the biggest challenges for network operators. Our expanded IGM portfolio solves that challenge by bringing the timing source closer to the base station. Microsemi is committed to continued innovations to solve the most difficult issues facing operators.”

    The expanded IGM portfolio and technology flexibly addresses indoor and outdoor deployment models for mobile service providers increasing network edge capacity and coverage to deliver advanced wireless services in public hotspots, such as K-20 campuses, public transit and retail settings.

    • IGM-1100i (indoor version): With its integrated GPS antenna, IGM-1100i operates indoors without the need for a dedicated antenna, associated cabling and installation hurdles. With increased capacity now from eight PTP 1588 clients to 16 clients, the IGM-1100i now also includes support for Telecom 2008 and Default 1588 profiles and support for CLI over SSH.
    • IGM-1100o (outdoor version): Complementing the IGM-1100i in outdoor wireless deployment cases where extended temperature range and ruggedization are critical factors, the IGM-1100o integrates the PTP 1588 master and an outdoor GPS antenna in a single device. It can be installed at an outdoor location like a roof top or alongside other eNodeB antenna installations. The IGM-1100o Power-over-Ethernet (PoE) capability makes rooftop deployment much simpler than over coax.
    • IGM-1100x (external antenna support): Designed for scenarios with a pre-existing GPS antenna and associated cabling, or when an indoor installation is unrealistic, IGM-1100x provides very quick and low-cost deployment of a PTP 1588 master by connecting to the existing cable via a simple cable installation to a telecom cabinet or hut. The IGM-1100x is the ideal solution for IEEE 1588 deployments of up to 16 clients with existing GPS antennas, with the TimeProvider 2700 supporting up to 128 clients.

    The entire IGM portfolio leverages the same software, delivering consistent behavior and capabilities for each form factor.

    “With increased smartphone usage worldwide, operators must leverage their spectrum more efficiently to enable more network coverage and capacity,” said David Chambers, founder of ThinkSmallCell. “Although network strategies vary widely — ranging from small cells, distributed antenna systems (DASs), spectrum re-farming, cloud RAN, eNodeBs and carrier Wi-Fi  coordination and interference mitigation within these heterogeneous networks are key to enabling new services, and this implies precise timing. Microsemi has understood that a portfolio of flexible solutions is essential, so operators can deploy the right timing solutions for their specific network architectures. Microsemi’s expanded IGM product portfolio is good news for operators and for the mobile industry.”

    According to market research firm Infonetics, the first nine months of 2015 were marked by increasing small-cell rollouts all over the world and continue to point to double-digit growth. The firm expects the total small-cell market to hit $2.2 billion in 2019 at a compound annual growth rate (CAGR) of 20 percent.

    The IGM product portfolio is part of Microsemi’s broad portfolio for LTE Advanced deployment, which includes:

    • TimePictra,  a modular web-based synchronization management system that scales and evolves with operational requirements, monitoring the IGM family as well as other Microsemi IEEE 1588 Grand Masters;
    • Indoor managed PoE midspans, which allow upgrading the network to support PoE with virtually no downtime. The family includes products with port densities of up to 24 ports and 60 watts per port, to power small cells and the IGM-1100i; and
    • Outdoor PoE switches, hubs, midspans and surge protectors, a complete outdoor PoE portfolio, essential for the deployment of the IGM-1100o.
  • D-COAX offers reconfigurable probe station for chip testing

     

    D-COAX Inc. has introduced a reconfigurable probe station (Model W4.0 x L6.5) for design engineers and technicians. It’s used to test a chip or small circuit board for the project that cannot wait for local lab probe station availability. The probe station has a small footprint (X = 22 in, Y = 9 in, Z = 8 inch) and can be used at the desk or a lab. It is transportable at 9 pounds.

    The probe station is fully manual with the following features:

    • 4.0 inch x 6.5 inch test plate with vacuum holes
    • wide probe holder plates on each positioner with multiple holes for probe mounting
    • both positioners can slide back and forth in the X and Y directions and can be moved toward the DUT at the angle
    • the height positioning is accomplished via digital micrometers
    • each positioner can be locked independently.
    • Magnetic plates attach to the normal probe mounting holes to allow additional magnetic XYZ positioners with fine adjustment
    • probe arms are adjustable in the X, Y, Z, and theta.

    The probe station is compatible with all standard wafer probes and many DC needle set-ups. See a video at the company’s website. All D-COAX products are made in the USA.

    For more information, e-mail [email protected].

  • Trimble multi-GNSS timing antenna allows for BeiDou, Galileo

    Trimble has introduced its latest smart antenna with an integrated multi-GNSS receiver for high accuracy and precise timing applications. The Acutime 360 smart antenna provides a pulse-per-second (PPS) output synchronized to UTC within 15 nanoseconds (one sigma).

    The Acutime 360 is the latest in the Acutime line of products, which have been deployed in the field for more than 20 years. With a user friendly interface for communication, the GNSS smart antenna is light weight and easy to integrate with a host system. It is suitable for critical infrastructure including wireless networks and utilities.

    The Acutime 360 GNSS smart antenna is built using the Trimble 360 technology platform for multi-GNSS systems, which includes support for GPS, GLONASS, BeiDou and is Galileo-ready. The Acutime 360 has tracking sensitivity of -160 dBm and an acquisition sensitivity of -148 dBm. The increased sensitivity translates into greater reliability and accuracy.

    The Acutime 360 smart antenna uses a standard 12-pin connector and is footprint-compatible with previous generations of Acutime antennas. The Acutime 360 antenna is an ideal solution for precise timing and frequency synchronization for a wide range of applications including:

    • sync reference for wireless and small cell networks
    • utilities – smart grid
    • Supervisory Control and Data Acquisition (SCADA) systems
    • critical infrastructure

    Designed for long-term reliability, the IP67 compliant Acutime 360 is corrosion-resistant and waterproof and has a rounded top that facilitates run-off from the elements. It weighs less than 6 ounces and offers an extremely cost-effective solution for adding GNSS reference to any application where ease of installation and long-term reliability is critical.

    Once powered, the Acutime 360 automatically tracks satellites and surveys its position to within meters. It then switches to over-determined time mode and generates a PPS, outputting a time tag for each pulse. The smart antenna’s Time-Receiver Autonomous Integrity Monitor (T-RAIM) algorithm maintains PPS integrity.

    The GNSS smart antenna can operate in extreme temperatures (-40°C to +85°C) and hostile RF environments typically encountered at wireless network transmitter sites. It requires less than 1 watt of power to operate and outputs the Trimble Standard Interface Protocol (TSIP) or industry-standard NMEA messages.

    The Acutime 360 smart timing antenna is expected to be available in the second quarter of 2016 through Trimble’s Time and Frequency sales network.

  • ION GNSS+ 2016 abstracts due March 10

    Abstracts for ION GNSS+ 2016 are due Thursday, March 10.

    ION GNSS+ 2016 is the 29th International Technical Meeting of the Satellite Division of the Institute of Navigation. The theme of this year’s conference is “GNSS + Other Sensors in Today’s Marketplace.” The conference will take place Sept. 12-16 (tutorials Sept. 12-13) at the Oregon Convention Center in Portland, Oregon.

    ION GNSS+ 2016 is the world’s largest technical meeting and showcase of GNSS technology, products and services, and brings together international leaders in GNSS and related positioning, navigation and timing fields to present new research, introduce new technologies, update current policy, demonstrate products and exchange ideas.

    ION GNSS+ 2016 features two different tracks, each with different abstract and manuscript submission requirements.

    Applications and Advances Tracks

    • Mass Market and Commercial Applications
    • High Performance and Safety Critical Applications
    • System Updates, Plans and Policies

    Research and Innovations Tracks

    • Multisensor Navigation
    • Algorithms and Methods
    • Advanced GNSS Technologies

    Note: Submission requirements have changed and are dependent on the track for which you have submitted. Authors with abstracts accepted in the Research and Innovations Track will have the option to have their paper peer-reviewed.

    Abstracts must be received by Thursday, March 10, 2016. For information on ION GNSS+ 2016 or for instructions for submitting an abstract, visit www.ion.org/gnss.

  • Opportunity for Accuracy: Terrestrial SOPs attractive supplement to GNSS

    Exploiting terrestrial signals of opportunity (SOPs) can significantly reduce the vertical dilution of precision (VDOP) of a GNSS navigation solution. Simulation and experimental results show that adding cellular SOP observables is more effective in reducing VDOP than adding GNSS space vehicle (SV) observables.

    By Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas

    GNSS position solutions can in many cases suffer from a high vertical dilution of precision (VDOP) due to lack of space vehicle (SV) angle diversity. Signals of opportunity (SOPs) have been recently considered to enable navigation whenever GNSS signals become inaccessible or untrustworthy. Terrestrial SOPs are abundant and are available at varying geometric configurations, making them an attractive supplement to GNSS for reducing VDOP.

    Common metrics used to assess the quality of the spatial geometry of GNSS SVs are the parameters of the geometric dilution of precision (GDOP); namely, horizontal dilution of precision (HDOP), time dilution of precision (TDOP), and VDOP. Several methods have been investigated for selecting the best GNSS SV configuration to improve the navigation solution by minimizing the GDOP. While the navigation solution is always improved by additional observables from GNSS SVs, the solution’s VDOP generally remains of lesser quality than the HDOP. GPS augmentation with terrestrial transmitters that transmit GPS-like signals have been shown to reduce VDOP. However, this requires installation of additional proprietary infrastructure.

    This article studies VDOP reduction by exploiting terrestrial SOPs, particularly cellular code division multiple access (CDMA) signals, which have inherently low elevation angles and are free to use.

    In GNSS-based navigation, the states of the SVs are readily available. For SOPs, however, even though the position states may be known a priori, the clock-error states are dynamic; hence, they must be continuously estimated. The states of SOPs can be made available through one or more receivers in the navigating receiver’s vicinity. Here, the estimates of such SOPs are exploited and the VDOP reduction is evaluated.

    PROBLEM FORMULATION

    Consider an environment comprising a receiver, M GNSS SVs, and N terrestrial SOPs. Each SOP will be assumed to emanate from a spatially stationary transmitter, and its state vector, xsop(n), will consist of its three-dimensional (3-D) position rsop(n) and clock bias cδtsop(n), where n=1,…,N and c is the speed of light. The receiver draws pseudorange observations from the GNSS SVs and from the SOPs. The observations are fused through an estimator whose role is to estimate the state vector of the receiver xr=[rrT, cδtrT, where rr and cδtare the 3D position and clock bias of the receiver, respectively. To simplify the discussion, assume that the pseudorange observation noise is independent and identically distributed across all channels with variance σ2. The estimator produces an estimate of the receiver’s state vector Eq-xr and associated estimation error covariance P =σ2(HTH)-1.

    Without loss of generality, assume an East-North-Up (ENU) coordinate frame to be centered at Eq-xr. In this frame, the dilution of precision matrix G(HTH)-1 is completely determined by the azimuth and elevation angles from the receiver to each SV, denoted azsv(m) and elsv(m), respectively, and the receiver to each SOP, denoted azsop(n) and elsop(n), respectively, where m=1,…,M. Hence, the quality of the estimate depends on these angles and the pseudorange observation noise variance σ2. The diagonal elements of G, denoted gii, are the parameters of the dilution of precision (DOP) factors:

    Eq-GDOP b Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas

    Therefore, the DOP values are directly related to the estimation error covariance; hence, the more favorable the azimuth and elevation angles, the lower the DOP values. If the observation noise was not independent and identically distributed, the weighted DOP factors must be used.

    VDOP REDUCTION VIA SOPs

    With the exception of GNSS receivers mounted on high-flying and space vehicles, all GNSS SVs are typically above the receiver, that is, the receiver-to-SV elevation angles are theoretically limited between 0°≤elsv(m)≤90°. GNSS receivers typically restrict the lowest elevation angle to some elevation mask, elsv,min, so to ignore GNSS SV signals that are heavily degraded due to the ionosphere, troposphere and multipath.

    As a consequence, GNSS SV observables lack elevation angle diversity, and the VDOP of a GNSS-based navigation solution is degraded. For ground vehicles, elsv,min is typically between 5° and 20°. These elevation angle masks also apply to low-flying aircraft, such as small unmanned aerial vehicles (UAVs), whose flight altitudes are limited to 500 feet (approximately 152 meters) by the Federal Aviation Administration (FAA).

    In GNSS + SOP-based navigation, the elevation angle span may effectively double, specifically –90°≤elsop(n)≤90°. For ground vehicles, useful observations can be made on terrestrial SOPs that reside at elevation angles of elsop(n)=0°. For aerial vehicles, terrestrial SOPs can reside at elevation angles as low as elsop(n)=–90°, for example, if the vehicle is flying directly above the SOP transmitter.

    To illustrate the VDOP reduction by incorporating additional GNSS SV observations versus additional SOP observations, an additional observation at elnew is introduced, and the resulting VDOP(elnew) is evaluated. To this end, M SV azimuth and elevation angles were computed using GPS ephemeris files accessed from the Yucaipa, California, station from Garner GPS Archive, which are tabulated in Table 1. 

    Table 1. SV azimuth and elevation angle (degrees). Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Table 1. SV azimuth and elevation angle (degrees).

    For each set of GPS SVs, the azimuth angle of an additional observation was chosen as a random sample from a uniform distribution between 0° and 360°, that is, aznew~U(0°,360°). The corresponding VDOP for introducing an additional measurement at a sweeping elevation angle –90°≤elnew≤90° are plotted in Figure 1 (a)–(d) for M=4,…,7, respectively.

    figure 1 A receiver has access to M GPS SVs from Table I. Plots (a)- (d) show the VDOP for each GPS SV configuration before adding an additional measurement (red dotted line) and the resulting VDOP(elnew) for adding an additional measurement (blue curve) at an elevation angle –90°≤elnew≤90° for M=4,…,7, respectively. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 1. A receiver has access to M GPS SVs from Table 1. Plots (a)- (d) show the VDOP for each GPS SV configuration before adding an additional measurement (red dotted line) and the resulting VDOP(elnew) for adding an additional measurement (blue curve) at an elevation angle –90°≤elnew≤90° for M=4,…,7, respectively.

    The following can be concluded from these plots. First, while the VDOP is always improved by introducing an additional measurement, the improvement of adding an SOP measurement is much more significant than adding an additional GPS SV measurement. Second, for elevation angles inherent only to terrestrial SOPs, that is, –90°≤elsop(n)≤0°, the VDOP is monotonically decreasing for decreasing elevation angles.

    SIMULATION RESULTS

    To compare the VDOP of a GNSS-only navigation solution with a GNSS + SOP navigation solution, simulations were conducted using receivers mounted on ground and aerial vehicles.

    Ground Receiver. The position of a receiver mounted on a ground vehicle was set to r≡(106 )•[– 2.431171,– 4.696750, 3.553778]expressed in an Earth-Centered-Earth-Fixed (ECEF) coordinate frame. The elevation and azimuth angles of the GPS SV constellation above the receiver over a 24-hour period was computed using GPS SV ephemeris files from the Garner GPS Archive. The elevation mask was set to elsv,min≡20°. The azimuth and elevation angles of three SOPs, which were calculated from surveyed terrestrial cellular CDMA tower positions in the navigating receiver’s vicinity, were set to azsop≡[42.4°,113.4°,230.3° ]and elsop ≡[3.53°,1.98°,0.95°]T, respectively. The resulting VDOP, HDOP, GDOP and associated number of available GPS SVs for a 24-hour period starting from midnight, Sept. 1, 2015, are plotted in Figure 2.

    Figure 2. Fig. (a) represents the number of SVs with an elevation angle >20° as a function of time. Fig. (b)-(d) correspond to the resulting VDOP, HDOP, and GDOP, respectively, of the navigation solution using GPS only, GPS + 1 SOP, GPS + 2 SOPs, and GPS + 3 SOPs. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 2. Fig. (a) represents the number of SVs with an elevation angle >20° as a function of time. Fig. (b)-(d) correspond to the resulting VDOP, HDOP, and GDOP, respectively, of the navigation solution using GPS only, GPS + 1 SOP, GPS + 2 SOPs, and GPS + 3 SOPs.

    The following can be concluded from these plots. First, the resulting VDOP using GPS + N SOPs for N≥1 is always less than the resulting VDOP using GPS alone. Second, using GPS + N SOPs for N≥1 prevents large spikes in VDOP when the number of GPS SVs drops. Third, using GPS + N SOPs for N≥1 also reduces both HDOP and GDOP.

    Unmanned Aerial Vehicle. The initial position of a receiver mounted on a UAV was set to r≡(106 )•[–2.504728, –4.65991, 3.551203]T. The receiver’s true trajectory evolved according to velocity random walk dynamics. Pseudorange observations on all available GPS SVs above an elevation mask set to elsv,min≡20° and three terrestrial SOPs were generated using a MATLAB-based simulator. The simulator used SV trajectories which were computed using GPS SV ephemeris files from Sept. 1, 2015, 10:00 to 10:03 a.m.

    The positions of the SOPs were set to rsop(1)≡(106)•[– 2.504953,– 4.659550, 3.551292]T, rsop(2)≡(106)•[– 2.503655, –4.659645, 3.552050]T, and rsop(3)≡(106)•[– 2.504124,– 4.660430, 3.550646]T, which are the locations of surveyed cellular towers in the UAV’s vicinity. The UAV’s true trajectory, navigation solution from using only GPS SV pseudoranges, and navigation solution from using GPS and SOP pseudoranges are illustrated in Figure  3 (top). The corresponding 95th-percentile uncertainty ellipsoids for a sample set of navigation solutions are illustrated in Figure 3 (bottom).

    Figure 3 . Simulation results for a UAV flying over downtown Los Angeles. Top: Illustration of the true trajectory (red curve), navigation solution from using pseudoranges from six GPS SVs (yellow curve), and navigation solution from using pseudoranges from six GPS SVs and three cellular CDMA SOPs (blue curve). Bottom: Illustration of uncertainty ellipsoid (yellow) of GPS only navigation solution and uncertainty ellipsoid (blue) of GPS + SOP navigation solution. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 3 . Simulation results for a UAV flying over downtown Los Angeles.
    Top: Illustration of the true trajectory (red curve), navigation solution from using pseudoranges from six GPS SVs (yellow curve), and navigation solution from using pseudoranges from six GPS SVs and three cellular CDMA SOPs (blue curve).
    Bottom: Illustration of uncertainty ellipsoid (yellow) of GPS only navigation solution and uncertainty ellipsoid (blue) of GPS + SOP navigation solution.

    The following can be noted from these plots. First, the accuracy of the vertical component of the GPS-only navigation solution is worse than that of the GPS + SOP navigation solution. Second, the uncertainty in the vertical component of the GPS-only navigation solution is larger than that of the GPS + SOP navigation solution, which is captured by the yellow and blue uncertainty ellipsoids, respectively. Third, the accuracy of the horizontal component of the navigation solution is also improved by incorporating cellular SOP pseudorange observations alongside GPS SV pseudorange observations.

    EXPERIMENTAL RESULTS

    A field experiment was conducted using software-defined receivers (SDRs) to demonstrate the reduction of VDOP obtained from including SOP pseudoranges alongside GPS pseudoranges for estimating the states of a receiver. To this end, two antennas were mounted on a vehicle to acquire and track multiple GPS signals and three cellular base transceiver stations (BTSs) whose signals were modulated through CDMA. The GPS and cellular signals were simultaneously downmixed and synchronously sampled via two universal software radio peripherals (USRPs). These front-ends fed their data to the Multichannel Adaptive TRansceiver Information eXtractor (MATRIX) SDR, developed at the Autonomous Systems Perception, Intelligence and Navigation (ASPIN) Laboratory at the University of California, Riverside. The LabVIEW-based MATRIX SDR produced pseudorange observables from five GPS L1 C/A signals in view and the three cellular BTSs.

    Figure 4 depicts the experimental hardware setup.

    Figure 4. Experiment hardware setup. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 4. Experiment hardware setup.

    The pseudoranges were drawn from a receiver located at rr(106)•[– 2.430701,– 4.697498, 3.553099]T, expressed in an ECEF frame, which was surveyed using a carrier-phase differential GPS receiver. The corresponding SOP state estimates were collaboratively estimated by receivers in the navigating receiver’s vicinity. The pseudoranges and SOP estimates were fed to a least-squares estimator, producing x^r and associated P from which the VDOP, HDOP, and GDOP were calculated and tabulated in Table 2 for M GPS SVs and N cellular CDMA SOPs. A sky plot of the GPS SVs used is shown in Figure 5.

    Figure 5. Left: Sky plot of GPS SVs: 14, 21, 22, and 27 used for the four SV scenarios. Right: Sky plot of GPS SVs: 14, 18, 21, 22, and 27 used for the five SV scenarios. The elevation mask, elsv,min, was set to 20° (dashed circle). Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 5. Left: Sky plot of GPS SVs: 14, 21, 22, and 27 used for the four SV scenarios. Right: Sky plot of GPS SVs: 14, 18, 21, 22, and 27 used for the five SV scenarios. The elevation mask, elsv,min, was set to 20° (dashed circle).

    The tower locations, receiver location and a comparison of the resulting 95th-percentile estimation uncertainty ellipsoids of Eq-xrfor {M,N}={5,0} and {5,3} are illustrated in Figure 6.

    Figure 6. Top: Cellular CDMA SOP tower locations and receiver location. Bottom: Uncertainty ellipsoid (yellow) of navigation solution from using pseudoranges from five GPS SVs and uncertainty ellipsoid (blue) of navigation solution from using pseudoranges from five GPS SVs and three cellular CDMA SOPs. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Figure 6. Top: Cellular CDMA SOP tower locations and receiver location. Bottom: Uncertainty ellipsoid (yellow) of navigation solution from using pseudoranges from five GPS SVs and uncertainty ellipsoid (blue) of navigation solution from using pseudoranges from five GPS SVs and three cellular CDMA SOPs.

    The corresponding vertical error was 1.82 meters and 0.65 meters respectively. Hence, adding three SOPs to the navigation solution that used five GPS SVs reduced the vertical error by 64.3 percent. Although this is a significant improvement over using GPS observables alone, improvements for aerial vehicles are expected to be even more significant, since they can exploit a full span of observable elevation angles as demonstrated in the simulation section.

    Table 2. DOP values for M + N SOPs. Source: Joshua J. Morales, Joe J. Khalife and Zaher M. Kassas
    Table 2. DOP values for M SVs + N SOPs.

    CONCLUSION

    This article studied the VDOP reduction of a GNSS-based navigation solution by exploiting terrestrial SOPs. It was demonstrated that the VDOP of a GNSS solution can be reduced by exploiting the inherently small elevation angles of terrestrial SOPs. Experimental results using ground vehicles equipped with SDRs demonstrated VDOP reduction of a GNSS navigation solution by exploiting a varying number of cellular CDMA SOPs. Incorporating terrestrial SOP observables alongside GNSS SV observables for VDOP reduction is particularly attractive for aerial systems, since a full span of observable elevation angles becomes available.

    MANUFACTURERS

    Two National Instruments universal software radio peripherals were used in the experiment. A Trimble 5700 receiver surveyed the experimental receiver location.


    JOSHUA J. MORALES is pursuing a Ph.D. in electrical and computer engineering at the University of California, Riverside.

    JOE J. KHALIFEH is a Ph.D. student at the University of California, Riverside.

    ZAHER (ZAK) M. KASSAS is an assistant professor at the University of California, Riverside. He received a Ph.D. in electrical and computer engineering from the University of Texas at Austin. Previously, he was a research and development engineer with the LabVIEW Control Design and Dynamical Systems Simulation Group at National Instruments Corp.

    This article is based on a technical paper presented at the 2016 ION ITM conference in Monterey, California.

  • Inspector Gadget: Drones could solve gas-leak detection issue

    A methane leak at a Southern California Gas (SoCalGas) storage facility has shone a spotlight on how unmanned aerial vehicles can be used to inspect utilities. The massive three-month leak — temporarily plugged on Feb. 12 — chased thousands of Los Angeles residents from their homes.

    At least 2 percent of natural gas is wasted through methane leaks at production sites, according to the U.S. Department of Energy (DOE).

    UAVs are already being used for some electrical grid and pipeline inspections, mostly in pilot programs, but their potential for hands-off long-distance monitoring is just starting to be realized.

    Along with criminal charges, SoCalGas is facing regulatory mandates to improve air-quality monitoring at its facilities. Nationally, the DOE’s Advanced Research Project Agency-Energy is funding a program to accurately locate and measure methane emissions associated with natural gas production.

    Source: GPS World Staff
    Bridger’s proposed leak detector uses lidar in combination with range and gas absorption measurements. (Illustration: Bridger Photonics)

    The program has given one company, Bridger Photonics, a $2 million grant to develop a leak detector. Bridger plans to build a mobile methane sensing system capable of surveying a 10 x 10 meter well platform in just over five minutes with precision that exceeds existing technologies used for large-scale monitoring.

    Bridger’s detector useslaser beams to generate 3D images that show the distance and concentration of a gas leak, even showing the types and concentration of the hydrocarbons.

    Mounted on a UAV, the sensor would give inspectors access to complicated or obscured infrastructures at processing plants, drilling rigs and pipelines. The sensor could also be mounted on a vehicle.

    Bridger’s goal is for its devices to be able to service up to 85 sites, and cost $1,400 to $2,220 a year to operate per wellsite. Bridger plans to field test its technology this year and make it available commercially in 2017.


    Bridger’s imager

    Bridger’s gas imager is a point-scanning lidar sensor that performs simultaneous range and gas absorption measurements, according to Mike Thorpe, chief technology officer of Bridger Photonics. The measurements are combined to derive high-accuracy estimates of the gas concentration.

    The measurement beam is scanned around the scene to create 3D topographic images of hard targets overlaid with 2D maps of the gas concentration.

    The datasets will be geo-registered using GPS and inertial measurements.

    The prototype sensor will have the following performance specs:

    • 1 kpps measurement rate
    • 3-100 m range
    • 1 cm down-range resolution
    • 2 cm cross-range resolution
    • <3 ppm-m methane detection sensitivity for distances < 30 m
    • <15 ppm-m methane detection sensitivity for distances < 100 m

     

    Bridger also is developing measurement approaches and algorithms to enable automatic leak detection and leak rate estimation.

  • COSPAR to host satellite panel on GNSS

    The next meeting of the Committee on Space Research (COSPAR) is expected to attract about 2,500 scientists and engineers from around the world. COSPAR Istanbul 2016: 41st COSPAR Scientific Assembly will be held July 30-Aug. 7 in Istanbul, Turkey. Deadline for early registration is May 31.

    More than 100 symposia will cover all areas of space science:

    • space studies of the Earth’s surface,
    • meteorology and climate,
    • space studies of the Earth-Moon,
    • planets and small bodies of the solar system,
    • space studies of the upper atmospheres of the Earth and planets including reference atmosphere,
    • space plasmas in the Solar system, including planetary magnetospheres,
    • research in astrophysics from space,
    • life sciences as related to space,
    • material sciences in space,
    • fundamental physics in space, and
    • several panel meetings.

    Interdisciplinary lectures will also be given by key scientists and several associated events, such as a meeting organized by Elsevier for young scientists to help them publish or review scientific articles.

    Panel on Satellite Dynamics

    A meeting for geodesists, organized by the COSPAR Panel on Satellite Dynamics, will be held in conjunction with IAG Commission 1.

    The aim of the panel is to support activities related to the detailed description of the motion of artificial celestial bodies. This goal should be achieved by improving the current theories of motion and by evaluating their determining forces in a more sophisticated way.

    Detailed theoretical understanding of the dynamics of satellites should coincide with the results of precise tracking in order to obtain the most precise knowledge possible of the orbit and the corresponding orbital positions.

    Two different sessions (both as two-day meetings) are part of the Panel on Satellite Dynamics:

    PSD.1 The scope of the Panel on Satellite Dynamics entails the positioning of a wide range of objects in space, including Earth orbiting satellites for Earth observation such as GRACE, GOCE, Swarm and the Copernicus Sentinels, and navigation satellite systems such as GPS, GLONASS, Galileo, BeiDou, QZSS or tracking systems such as SLR and DORIS. In addition, positioning plays an important role in the success of the continuously growing number of today’s and tomorrow’s planetary and solar system missions. Limiting errors in Precise Orbit Determination (solar radiation pressure, time variable gravity fields, phase center corrections, etc…) are of critical interest for many stakeholders. Moreover, formations of satellites are being realized and proposed for Earth observation and fundamental sciences, that impose very severe constraints on (relative) positioning and orbit and attitude control solutions (e.g. micro-propulsion). Satellite orbit determination requires the availability of tracking systems, well established reference frames and accurate station coordinate solutions, detailed force and satellite models, and high-precision time and frequency standards. Contributions are solicited covering all recent developments and plans in ground, satellite or probe positioning and navigation.

    PSD.2 Global Navigation Satellite Systems (GNSS) are playing an increasing role in monitoring the Earth’s environment. Together with other space geodesy techniques (InSAR, DORIS, ICESat, LiDAR, GRACE/GOCE and Radar Altimetry, etc.), it can measure changes to the land surface geometry with millimeter accuracy, and sub-meter pixel resolution. This session will address current geodetic and remote sensing capabilities, sensing/imaging in order to measure and monitor terrain, ground moisture, water cycle effects, ice/snow melting, ocean circulation and sea state, atmospheric  weather and climate, earthquakes and tsunamis, volcanic activity, and more, warning using a variety of geodetic and remote sensing techniques. Papers on combining GNSS with in-situ observations and other satellite or airborne sensor data, as well as discussing new applications for such systems, and future missions/challenges are also welcome.

  • VectorNav Technologies introduces VN-360 GPS-Compass

    VectorNav Technologies has introduced the VN-360 GPS-Compass heading and position sensor. The VN-360 is an OEM GPS-Compass module that provides an accurate, True North heading solution for systems integrators seeking a reliable alternative to magnetic-based sensors.

    Many systems currently available on the market depend on digital magnetometers for providing heading measurements of a manned or unmanned platform. However, the majority of these platforms (such as multi-rotor UAVs, ground robots or satellite antennas) also include ferrous materials, motors, batteries or electrical components that drastically limit the ability of a magnetometer to provide an accurate or reliable heading solution. VectorNav’s VN-360 provides a miniature, cost-effective GPS-based alternative that is unaffected by these magnetic disturbances and changes to the magnetic environment.

    Incorporating two onboard GNSS receivers, the VN-360 calculates the relative position between its two GNSS antennas to derive a heading solution that is an order of magnitude more accurate than a magnetic compass. It supports a variety of GNSS antennas that can be mounted on the host platform with a separation distance anywhere from a­­­ few centimeters out to several meters. This distance can be configured to provide optimal start-up time, outputting an accurate heading solution typically under two minutes.

    “The VN-360 is like no other product on the market in that it provides a cost-effective solution for the difficult challenge of obtaining an accurate and reliable heading solution,” said VectorNav President John Brashear. “VectorNav’s GPS-Compass technology marks a turning point in the way we approach heading measurement and will improve the capabilities and performance of a variety of next-generation manned and unmanned systems.”

    The VN-360 is ideal for applications such as antenna pointing, multi-rotor UAVs and aerostats, automated agriculture, heavy machinery, ground robots, weapons training and warfare simulation, and direct surveying among others.

    The VN-360 joins VectorNav’s line of inertial sensor systems, which includes the VN-100 IMU/AHRS, VN-200 GPS/INS and VN-300 Dual Antenna GPS/INS, and will be on display at VectorNav’s booth #347 at Satellite 2016 in National Harbor, Maryland, March 7-10. For information on pricing or to schedule a meeting time during the Satellite 2016 event, contact VectorNav at the following: email: [email protected]; tel: +1-512-772-3615; fax: +1-512-772-3086.

  • Topcon announces new geodetic antenna

    Topcon Positioning Group announces the release of a new full wave geodetic antenna — the G5-A1.  The portable antenna is designed to provide improved multipath mitigation for use with a mobile base station site or network reference station.

    “When paired with the Topcon NET-G5 receiver, the zero-centered geodetic antenna provides a powerful and cost-effective entry-level solution” said Charles Rihner, vice president of the Topcon GeoPositioning Solutions Group.

    The G5-A1 is optimized for geospatial industries and designed to track all globally available and developing satellite constellations. The antenna weighs approximately 1 pound (.5 kg) and is 7 inches (17.9 cm) wide.

    “With its portability and geodetic level performance, the new G5-A1 antenna provides an excellent choice for mobile base system and economy reference station system,” Rihner said.